 |
California Code of Regulations (Last Updated: August 6, 2014) |
 |
Title 8. Industrial Relations |
|
|
Division 1. Department of Industrial Relations |
|
|
Chapter 4. Division of Industrial Safety |
|
|
Subchapter 7. General Industry Safety Orders |
|
|
Group 13. Cranes and Other Hoisting Equipment |
|
|
Article 101. Slings |
|
|
Table S-1 |
|
Table S-1 Rated Capacity (Working Load Limit), for Alloy Steel Chain Slings* Rated Capacity (Working Load Limit), Pounds TABULAR OR GRAPHIC MATERIAL SET FORTH AT THIS POINT IS NOT DISPLAYABLE (1) Rating of multileg slings adjusted for angle of loading measured as the included angle between the inclined leg and the vertical as shown in Figure S-5. (2) Rating of multileg slings adjusted for angle of loading between the inclined leg and the horizontal plane of the load, as shown in Figure S-5. (3) Quadruple sling rating is same as triple sling because normal lifting practice may not distribute load uniformly to all 4 legs. * Other grades of proof tested steel chain include Proof Coil, BBB Coil and Hi-Test Chain. These grades are not recommended for overhead lifting and therefore are not covered by this Order. Note:Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code. |
|
HISTORY 1. New NOTE filed 5-1-87; operative 5-31-87 (Register 87, No. 19). 2. Change without regulatory effect amending footnote filed 4-13-2004 pursuant to section 100, title 1, California Code of Regulations (Register 2004, No. 16). |