California Code of Regulations (Last Updated: August 6, 2014) |
Title 8. Industrial Relations |
Division 1. Department of Industrial Relations |
Chapter 4. Division of Industrial Safety |
Subchapter 6. Elevator Safety Orders |
Group II. Elevator Installations for Which the Installation Contract Was Signed Before October 25, 1998 |
Article 18. Design Data, Formulas, Tests on Approved Devices, and Electrical Regulations |
§ 3105. Governor Trip Speeds and Approval Data.
Latest version.
- (a) Governor Tripping Speeds. Figure 3105 A gives the maximum tripping speeds for various rated speeds.Maximum Governor Tripping SpeedsFIGURE 3105 A(b) Data Required for Approval.(1) Two complete sets of assembly and detail drawings of the governor shall be submitted, and shall show the following:(A) The construction of the governor and the dimensions of major parts for identification.(B) The adjustment range and values of the data as marked on the governor marking plate required by Section 3036(h).(2) The results of a test performed at the maximum tripping speeds for which the approval is to be issued. This test shall be witnessed by an authorized representative of the Division of Industrial Safety, or the division may accept reports of witnesses recognized as competent by the division.Group II regulations apply to existing elevators installed prior to October 25, 1998. Italicized paragraphs, sentences, or phrases apply to all existing elevators while non-italicized apply to elevators installed after 1970 or after the date the regulation was adopted.