 |
California Code of Regulations (Last Updated: August 6, 2014) |
 |
Title 8. Industrial Relations |
|
Division 1. Department of Industrial Relations |
|
Chapter 4. Division of Industrial Safety |
|
Subchapter 6. Elevator Safety Orders |
|
Group II. Elevator Installations for Which the Installation Contract Was Signed Before October 25, 1998 |
|
Article 12.3. Special Purpose Personnel Elevators |
§ 3085.19. Limitation of Load, Speed and Platform Area [Rule 1502.9]
Latest version.
- (a) The rated load shall not exceed 650 lbs (294 kg).(b) The inside net platform area shall not exceed nine (9) ft 2 (0.84 m2).(c) The minimum rated load shall not be less than that based on 70 lb/ft 2 (3.35 kPa) of inside net platform area or 250 lbs (113 kg) whichever is greater.(d) The rated speed shall not exceed 100 fpm (0.51 m/s).Exception to Section 3085.19: The capacity and/or speed may increased if the Division approves and the approval shall be based on data submitted before installation or alteration indicating compliance with the applicable requirements of subsection 3000(h), Major Alterations. For rack and pinion type elevators the data submitted shall include engineering details and calculations where applicable.(Title 24, Part 7, Section 7-3085.19)
Note
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.Group II regulations apply to existing elevators installed prior to October 25, 1998. Italicized paragraphs, sentences, or phrases apply to all existing elevators while non-italicized apply to elevators installed after 1970 or after the date the regulation was adopted.