§ 17-30345.3. Specific License for Well Logging.

(a) The applicant for licensure or registration as described in Section 30194 shall meet the requirements specified in that section and any special requirements contained in this section.

(b) The applicant shall develop a program for training logging supervisors and logging assistants and submit to the Department a description of this program which specifies:

(1) Initial training;

(2) On the job training;

(3) Annual safety reviews provided by the licensee;

(4) Means the applicant will use to demonstrate the logging supervisor's knowledge and understanding of and ability to comply with the regulations and licensing requirements and the applicant's operating and emergency procedures; and

(5) Means the applicant will use to demonstrate the logging assistant's knowledge and understanding of and ability to comply with the regulations and licensing requirements and the applicant's operating and emergency procedures.

(c) The applicant shall submit to the Department written operating and emergency procedures as described in Section 30348.2 or an outline or summary of the procedures that include the important radiation safety aspects of the procedures.

(d) The applicant shall establish and submit to the Department its program for annual inspections of the job performance of each logging supervisor to ensure that the Department regulations, license requirements, and the applicant's operating and emergency procedures are followed. Inspection records must be retained for three years after each annual internal inspection.

(e) The applicant shall submit a description of its overall organizational structure as it applies to the radiation safety responsibilities in well logging, including specified delegations of authority and responsibility.

(f) If an applicant wants to perform leak testing of sealed sources, the applicant shall identify the manufacturers and the model numbers of the leak test kits to be used. If the applicant wants to analyze its own wipe samples, the applicant shall establish procedures to be followed and submit a description of these procedures to the Department. The description shall include:

(1) Instruments to be used;

(2) Methods of performing the analysis; and

(3) Pertinent experience of the person who will analyze the wipe samples.

HISTORY

1. New section filed 11-4-91; operative 12-4-91 (Register 92, No. 5).

Note

Note: Authority cited: Sections 208 and 25811, Health and Safety Code. Reference: Sections 25801, 25802, 25815, 25875 and 25876, Health and Safety Code.