California Code of Regulations (Last Updated: August 6, 2014) |
Title 13. Motor Vehicles |
Division 2. Department of the California Highway Patrol |
Chapter 2. Lighting Equipment |
Article 9. Auxiliary Driving, Fog, and Passing Lamps |
§ 711. Mechanical Test Requirements.
Latest version.
- Auxiliary lamps shall meet the following mechanical test requirements:(a) Housings for Sealed or Semisealed Optical Units. Housings for sealed or semisealed optical units shall comply with the following tests described in Article 5 of this subchapter when an optical unit of the type for which the housing is designed is installed in the device:Aiming adjustmentCorrosionLens recessionVibrationWarpage (when plastic housings are used)(b) Complete Assemblies. Assemblies consisting of a housing with a nonsealed unit or separable bulb, lens, or reflector shall comply with the following tests described in Article 5 of this subchapter:Aiming adjustmentCorrosionDustLens recessionMoistureVibrationWarpage (when plastic lenses or housings are used)(c) Sealed or Semisealed Optical Units. Sealed or semisealed optical units shall comply with the following tests described in Article 5 of this subchapter:Corrosion (when metal reflector backs or replaceable bulbs are used)Vibration (when filament shields or replaceable bulbs are used)Warpage (when plastic lenses or reflectors are used)
Note
Note: Authority cited: Section 26103, Vehicle Code. Reference: Sections 24012 and 26103, Vehicle Code.